Replacing windows costs $325 to $850 per standard double-hung installed in vinyl, and most whole-house projects of 10 windows land around $5,500. Frame material moves the number more than anything else: fiberglass runs about 40% more than vinyl and wood about 70% more, while triple-pane glass adds roughly 22%.

Your Windows

Ad

Glass & Installation

Typical Total Installed
โ€”
Low Estimate
โ€”
High Estimate
โ€”
Typical Per Window
โ€”
Per-Window Range
โ€”
Ad

Window Replacement Cost by Type (Installed)

Window TypeLowTypicalHigh10-Window Project
Double-hung$325$550$850$3,250 โ€“ $8,500
Slider$300$500$750$3,000 โ€“ $7,500
Casement$350$575$900$3,500 โ€“ $9,000
Awning$325$525$800$3,250 โ€“ $8,000
Picture$300$525$900$3,000 โ€“ $9,000
Bay or bow$1,600$2,700$4,100$16,000 โ€“ $41,000
Custom shape$450$750$1,200$4,500 โ€“ $12,000

National installed ranges for a standard 3ร—5 ft vinyl-frame window with low-E argon glass, retrofit insert, one story. Prices are 2025-26 national ranges, not quotes; labor ($100โ€“$300 per window) is included.

Frame Material & Options Upcharges

OptionCost Impact
Vinyl frameBaseline
Aluminum frame+5%
Fiberglass frame+40%
Composite frame+55%
Wood frame+70%
Double-pane clear glassโˆ’5% vs low-E argon
Triple-pane glass+22%
Full-frame installation+$175 per window
Second-story access+$75 per window
Custom or oversize unit+40% to +60%

Oversize units (over about 12 sq ft of glass) and true custom shapes are quoted piece by piece; the +40% to +60% line is a planning number until a fabricator prices your opening.

How the Window Cost Calculator Works

Window replacement pricing is quoted two ways: per unit installed for the whole job, or as a unit price plus labor. This calculator uses national installed ranges so you get a realistic project budget, not a teaser rate.

The formula

Per-window cost = type base price ร— material factor ร— glass factor + install adder + story adder. The type base covers a standard 3ร—5 ft unit with low-E argon glass and standard retrofit labor. Total = per-window cost ร— window count. Low, typical, and high values come from the published national range for each input, so the spread you see is real market spread, not padding.

How to use it

Count your windows (a typical 3-bedroom home has 8 to 12), pick the type and frame material you're actually shopping for, and leave glass at low-E argon unless you're in a cold climate or beside a busy road, where triple-pane earns its premium. Retrofit insert is the right default if your frames are square and rot-free; choose full-frame when the sills or trim are failing.

A worked example

Ten vinyl double-hungs with low-E argon glass, retrofit installed on a single-story home: $550 typical per window, so about $5,500 for the project, with a realistic range of $3,250 to $8,500 depending on market and installer.

Now the same house with six fiberglass casements in triple-pane, full-frame, on the second floor: $575 base ร— 1.40 material ร— 1.22 glass = $982, plus $175 full-frame and $75 second-story labor, or $1,232 per window and roughly $7,400 for six. Same formula, very different bill, which is why material choice is the biggest lever you control.

All figures are national planning ranges. Get three quotes; prices vary 30% or more between markets and between installers in the same town.

Per-Window Price by Frame and Glass

Frame material and glass multiply together, so the gap between the cheapest and dearest combination is wider than either table above suggests. These are typical installed prices for one double-hung window, retrofit installed on a single-story home, straight from the calculator's factors:

FrameDouble-pane clearLow-E + argonTriple-pane
Vinyl$523$550$671
Aluminum$549$578$705
Fiberglass$732$770$939
Composite$810$853$1,040
Wood$888$935$1,141

A wood triple-pane double-hung costs $1,141, more than double the $523 vinyl clear-glass unit. The low-E step is the cheapest upgrade on the list, about 5% over clear glass, and it's the default for a reason. Triple-pane adds 22%. It earns that in cold climates and next to busy roads, and much less in mild ones.

Retrofit vs Full-Frame vs Second Story

The two install adders are flat dollar amounts per window, $175 for full-frame and $75 for second-story access. That means they hit cheap windows hardest in percentage terms. Ten double-hung windows with low-E glass:

Install10 vinyl windows10 fiberglass windowsVinyl vs retrofit
Retrofit insert, 1 story$5,500$7,700—
Full-frame, 1 story$7,250$9,450+32%
Retrofit insert, 2+ stories$6,250$8,450+14%
Full-frame, 2+ stories$8,000$10,200+45%

On vinyl, full-frame adds about a third to the job. On fiberglass the same $1,750 is under a quarter. Full-frame is worth it when the old frames are rotten, out of square or leaking, or when you want to change the size of the opening. If the frames are sound, a retrofit insert gets you the same glass and the same frame material for less.

Whole-House Budgets by Window Count

The calculator scales straight with the count, so here are common project sizes for double-hung windows with low-E glass, retrofit, one story. The vinyl column shows the typical figure and the range; fiberglass and wood are typical only:

WindowsVinylFiberglassWood
6$3,300 ($1,950–$5,100)$4,620$5,610
8$4,400 ($2,600–$6,800)$6,160$7,480
10$5,500 ($3,250–$8,500)$7,700$9,350
12$6,600 ($3,900–$10,200)$9,240$11,220
15$8,250 ($4,875–$12,750)$11,550$14,025
20$11,000 ($6,500–$17,000)$15,400$18,700

These totals don't include a volume discount. Many installers take 5% to 15% off for a whole-house job, so on a 15-window vinyl project that's roughly $410 to $1,240 back. They also leave out storm-window removal, lead-safe work in pre-1978 homes, and permit fees, which some towns charge and others don't. Ask for those as separate lines on every quote.

Frequently Asked Questions

How much does it cost to replace 10 windows?

About $5,500 for 10 standard vinyl double-hung windows with low-E argon glass, retrofit installed, with a typical range of $3,250 to $8,500. Upgrading to fiberglass or wood frames, triple-pane glass, or full-frame installation pushes the same job to $8,000 to $12,000 or more.

What is the cheapest way to replace windows?

Vinyl retrofit inserts are the value play. A retrofit (pocket) install reuses your existing frame, skipping the trim and siding work of a full-frame replacement, and vinyl frames cost roughly 40% less than fiberglass and 70% less than wood. Doing the whole house in one project also earns volume discounts of 5% to 15% from most installers.

Is it cheaper to replace all windows at once?

Usually yes. Crews mobilize once instead of several times, and most companies discount per-window pricing 5% to 15% for whole-house jobs of 8 to 15 windows. A single project also means one mess, one permit, and one warranty conversation if something goes wrong.

Do new windows pay for themselves?

Slowly, if ever. Swapping clear single-pane glass for double-pane low-E typically trims $100 to $300 a year off heating and cooling, which means payback can stretch past 20 years. The better case is comfort, quieter rooms, easier operation, and resale appeal; Remodeling's Cost vs. Value Report puts window replacement recoup around 60% to 70%.

How much does a bay window cost to install?

A bay or bow window runs about $1,600 to $4,100 installed, with most landing near $2,700 for a standard vinyl unit. That price includes the extra framing, the header support, and the roof or seat-board tie-in that a flat window doesn't need, which is why it costs several times a standard double-hung.

How long does it take to replace windows?

A two-person crew typically installs one to two windows per hour. Ten standard retrofits are a one-day job; a whole house of 15 to 20 windows, or any full-frame replacements with trim and siding work, usually stretches to two days plus a cleanup visit.

How much more do fiberglass windows cost than vinyl?

About 40% more for the window itself. A double-hung with low-E glass, retrofit installed, runs about $550 in vinyl and $770 in fiberglass. Install adders are flat, so the gap is smaller in percentage terms on full-frame or second-story jobs.

Is full-frame window replacement worth the extra cost?

Only when the frame needs it. Full-frame adds about $175 per window, which takes 10 vinyl double-hungs from $5,500 to $7,250. It makes sense for rotten sills, water damage, out-of-square openings or a size change. Sound frames can take a retrofit insert.