How to Print a PDF at 24 x 36 (Arch D)

📄 6 min readUpdated November 5, 2026

If your PDF's already 1728 × 2592 points, print it at 100% and you're done. If it isn't, Fit will get you there: a Letter page enlarges to 282.4% and an 18 × 24 page to 133.3%. The catch is that any resize breaks a drawing's written scale. Here are the numbers, plus how Arch D differs from ANSI D.

What are the architectural paper sizes?

Print shops in the US use two engineering series, and they're easy to mix up. Architectural (Arch) sizes run in whole-number steps up to 24 × 36. ANSI sizes grow out of Letter. Both have a sheet called "D", and those aren't the same.

NameInchesMillimetersPDF points
Arch A9 × 12229 × 305648 × 864
Arch B12 × 18305 × 457864 × 1296
Arch C18 × 24457 × 6101296 × 1728
Arch D24 × 36610 × 9141728 × 2592
Arch E36 × 48914 × 12192592 × 3456
ANSI B (tabloid)11 × 17279 × 432792 × 1224
ANSI C17 × 22432 × 5591224 × 1584
ANSI D22 × 34559 × 8641584 × 2448
ANSI E34 × 44864 × 11182448 × 3168

Each series doubles, so two Arch C sheets side by side make exactly one Arch D. Arch D's points are worth remembering. Open your PDF's properties and look for 1728 × 2592 pt, or 24 × 36 in. If you see that, the file's already the right size and you don't need any scaling.

What scale do you need to reach 24 x 36?

We built a test page at each size with 12 pt text and a one-inch square, fit it to a 24 × 36 sheet with PyMuPDF, and read the results back. All of these match the math.

Your PDF pageScale on 24 × 3612 pt text becomesUnused space
Letter282.4%33.88 pt4.94 in on the long side
A4290.2%34.82 pt2.07 in on the long side
Tabloid (11 × 17)211.8%25.41 pt0.71 in on the short side
Arch B (12 × 18)200%24 ptNone
Arch C (18 × 24)133.3%16 pt4 in on the long side
ANSI D (22 × 34)105.9%12.71 pt0.71 in on the short side
A2145.1%17.41 pt2.06 in on the long side
A1102.6%12.31 pt2.03 in on the long side
Arch E (36 × 48)66.7%8 pt4 in on the long side

Only Arch B reaches the edges. Arch D's shape is 2:3, and no common office size shares it, so nearly everything leaves a strip. If that bothers you, fill the sheet and trim the extra with our crop tool, keeping important text away from the cut. A Letter page that fills 36 inches would need about 327% and would lose about 1.9 inches off each side.

Is Arch D the same as ANSI D?

No. ANSI D is 22 × 34, two inches smaller each way. Say "D size" to a shop and you can get either, so give them the inches. Architects usually mean 24 × 36, while engineering drawings often use 22 × 34, though the habit varies from firm to firm.

The two don't fit cleanly. Sending ANSI D to Arch D at Fit gives 105.9%, with 0.71 inches left over, and our one-inch square measured 1.059 inches. Going the other way gives 91.7%. In both cases the scale written on the drawing has stopped being true.

What happens to a drawing's scale when you resize it?

The written scale doesn't change, but the ruler truth does. Say a plan drawn at 1/4 in = 1 ft on Arch D goes to a smaller sheet:

Printed onScaleWhat 1/4 in = 1 ft becomesClean for measuring?
Arch B (12 × 18)50%1/8 in = 1 ftYes, half size
Tabloid (11 × 17)45.8%About 0.115 in = 1 ftNo
ANSI D (22 × 34)91.7%About 0.229 in = 1 ftNo
Arch C (18 × 24)66.7%1/6 in = 1 ftRarely useful
Arch E (36 × 48)133.3%1/3 in = 1 ftRarely useful
Letter30.6%About 0.077 in = 1 ftNo

Half size is the one that works, and it's why 12 × 18 sets are popular. Arch E to Arch C and ANSI D to tabloid also come out at exactly 50%. Anything else should be marked "not to scale", since someone will measure it. A bar scale drawn on the sheet shrinks along with the drawing, so it stays correct where a written scale doesn't.

If you're printing true size, choose Actual Size or 100% and turn off Fit. Fit can shrink a full-size sheet by a few percent to clear the printer's margins, and that's enough to throw off a measurement. After it prints, check a known dimension with a ruler.

How do you get a PDF ready for a print shop or plotter?

We haven't confirmed pricing or stock at any particular shop. Ask for a quote on bond paper if it's a plan, and on poster paper if it isn't, since those are often priced differently.

Can you print 24 x 36 at home?

Not on one sheet, unless you've got a wide-format printer. You can tile it. Counting a quarter-inch printer margin and no overlap, 24 × 36 takes 12 Letter sheets, 15 A4 sheets, or 8 sheets of 11 × 17. You'll want some overlap for trimming, which can add more. Our guide on printing a poster across several pages walks through it, and tiling works best for layout checks. It won't be accurate enough to measure from once it's taped together.

For smaller sheets, see our guides to A2 paper and 11 × 17 paper.

Frequently Asked Questions

What size is Arch D paper?

Arch D is 24 × 36 inches, or about 610 × 914 mm. In a PDF, that's 1728 × 2592 points. It isn't the same as ANSI D, which is 22 × 34 inches.

How much do I enlarge a Letter PDF to get 24 x 36?

Use 282.4%. That fills the 24-inch width and leaves 4.94 inches unused along the long side, because Letter's shape is wider than 2:3. Text at 12 pt becomes about 33.9 pt.

Can I shrink a 24 x 36 PDF to 11 x 17?

Yes, at 45.8%, with half an inch left over. It won't be a clean scale, though: 1/4 in = 1 ft becomes about 0.115 in. For an exact half size, print on 12 × 18 at 50%.

Should I choose Fit or Actual Size?

Use Actual Size or 100% if the PDF is already 24 × 36 and anyone will measure it. Use Fit when you're changing paper size and exact scale doesn't matter, then mark the print not to scale.

Is 24 x 36 a good poster size?

Yes, it's a common poster size as well as a plan size. Ask the shop for poster stock and tell them if there's color to the edge, since you may need about 1/8 inch of bleed on each side.

Related Tools